[. . . ] User Guide 3300BF Contents Attaching the Wrist Strap and Inserting the Batteries. . . . . . . . . . . . . . . . . . 1 Loading the Film. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Make sure the ends of the batteries are positioned according to the markings (+) and (-) inside the compartment cover. Loading the Film 1. To open the film compartment, push the latch in the direction of the arrow (1) and lift open the door (2). 2. Place the flat end of the cartridge over the white post in the chamber. 3. Pull the film leader until it reaches the film tip indicator (v FILM TIP). The best method is to hold the cartridge down with the right hand while pulling the film with the left. Press the shutter button three (3x) or four (4x) times until the number 1 appears in the status window. Setting the Date and Time Imprint Page 2 This feature allows you to include an imprint of the date and time in the picture. Do this by using the MODE, SELECT and SET buttons located on the film compartment cover. Use the tip of a ballpoint pen to depress the buttons. No Imprint in Picture Month, Day and Year Day, Month and Year Choosing the mode Choose the MODE by repeatedly pressing the MODE button until you reach the desired format. Each time this button is pressed, the format sequence will change as shown at left. Year, Month and Day Day and Time Example: Setting the Year, Month and Day To set the Year: 1. Press SET repeatedly until you reach the desired Year. To set the Month: 1. Press SET repeatedly until you reach the desired Month. To set the Day: 1. Press SET repeatedly until you reach the desired Day. Note: One 3 V lithium battery (CR2025) powers the display. [. . . ] This will cause smudges that may affect picture quality. Use a clean, lint-free, non abrasive cloth to clean the lens. Never use soap or solvents. For additional information on Polaroid Cameras & Film, call us toll-free at 1-800-343-5000. [. . . ]